Strategies for synthesizing non-bioaccumulable alternatives to PFOA and PFOS

This minireview describes the strategies for synthesis of fiuorinated surfactants potentially nonbioaccumulable.Various strategies have been focused on(Ⅰ) reducing the length of the perfluorocarbon chain,(Ⅱ) introducing hetero atoms into the fluorocarbon chain,(Ⅲ) introducing branch(herein and after branch means the fluoro-carbon chain section is not straight).In most cases,the surface tensions versus the surfactant concentrations have been assessed.These above strategies led to various highly fiuorinated(perfluorinated or not perfluorinated) surfactants whose chemical changes enabled to obtain novel alternatives to perfluorooctanoic acid(PFOA) and perfluorooctane sulphonate(PFOS).     

钯催化烯丙基磺酰胺的分子内胺氟化反应

报道了钯催化的非活性烯烃的胺氟化反应,在酸性添加剂HOAc的作用下,反应以较好的收率和区域选择性地得到6-endo环合产物,实现了氟代的环状磺胺类产物的有效合成.     

Palladium-catalyzed direct allylation of fluorinated benzothiadiazoles with allyl chlorides

A palladium catalyzed cross-coupling of fluorinated benzothiadiazoles (FBTs) with allyl chlorides is reported. The significant feature of this method is synthetic simplicity, providing a straightforward access to unsymmetrical and symmetrical alkylated FBT derivatives that are of interest in organic electronic and optoelectronic materials.     

一种新型多元共聚含氟丙烯酸树脂的制备及性能研究

以含氟丙烯酸酯与几种不同结构丙烯酸酯单体为原料,采用常规的自由基引发溶液聚合反应,制备了一种新型疏水低表面能丙烯酸树脂。并以水接触角和铅笔硬度两项指标考察其应用性能。经固化成膜后,聚合物膜与水的接触角达到118.5°,铅笔硬度达到F等级以上。系统研究了涂膜与水接触角和铅笔硬度的主要影响因素,可通过调节单体投料比来调控接触角和铅笔硬度来适应不同实际应用领域的技术指标需求。这种具有力学强度的疏水涂层具有很大的应用价值。     

Heat-resistant and soluble fluorinated poly(amide imide)s based on non-coplanar ortho-linked diimide-dicarboxylic acid

A series of novel fluorinated heat-resistant poly(amide imide)s (PAIS) based on non-coplanar diimide-diacid monomer (DIDA) were synthesized and characterized. The poly(amide imide)s were obtained in high yields and possessed inherent viscosities in the range of 0.47-0.91 dL g⁻¹. All of the polymers were amorphous in nature, showed outstanding solubility and could be readily soluble in common organic solvents such as N,N-dimethylacetamide, N-methyl-2-pyrrolidinoned, dimethyl sulfoxide, N,N-dimethylformamide, pyridine and tetrahydrofuran. Glass transition temperatures were in the range of 221-263 °C, as determined by differential scanning calorimetry. Degradation temperatures for 10% weight loss occurred all above 520 °C and char yields was more than 50% at 700 °C in nitrogen atmosphere. Moreover, these PAIs possessed low refractive indexes (n = 1.58-1.59), birefringence (Δn = 0.008-0.013), and dielectric constants (? ≈ 2.5) due to the trifluoromethyl pendent groups and ortho-catenated aromatic rings that interrupt chain packing and increase free volume.     

Fluorinated styrene-based monomers for cyclopolymerizations

The synthesis of versatile fluorine compounds and monomers for conducting polymer research and cyclopolymerizations is presented. Semiprotected 2,3,5,6-tetrafluoroterephthaldehyde 1 could be elaborated through Wittig olefination chemistry, deprotection and reduction to the previously unknown 4-vinyl-2,3,5,6-tetrafluorobenzylalcohol 8 in good yields. Compound 8 can be reacted to form the malonate ester, and then alkylation on the malonate moiety in mild conditions affords difunctional monomer 3. Through sequential esterifications on the malonate moiety, and subsequent alkylation, compound 4, a difunctional monomer for cyclopolymerization bearing one styrene and one perfluoroaryl styrene moiety, has been obtained. Preliminary experiments show that it is possible to cyclopolymerize 4 under free radical conditions.     

Synthesis of polysiloxane xerogels with fluorine-containing groups in the surface layer and their sorption properties

Hydrolysis and polycondensation reactions of tetraethoxysilane (TEOS) with 3,3,3-trifluoropropyl-trimethoxysilane (TFMS) or 1H,1H,2H,2H-perfluorooctyltriethoxysilane (PFES) were used to synthesize xerogels functionalized with fluorine-containing groups. According to transmission electron microscopy, the skeletons of synthesized polysiloxane xerogels have globular structures and consist of agglomerates of particles with fluorinated groups on their surfaces. FTIR spectroscopy showed that primary xerogel particles possess spatial polysiloxane networks, with fluorinated groups along with silanol groups and water in the surface layer. According to thermal analyses, the water content was 3–8 wt.%, and it decreased with increasing length of the fluorinated chain. Thermal destruction of the surface layer starts above 300 °C. The sorbents that were obtained were predominantly mesoporous materials with well-developed porous structures (S_BET = 400–960 m² g⁻¹, V_s = 0.66–0.93 cm³ g⁻¹). The influence of the TEOS/functional silane ratio and the natures of the functional groups on the structural and adsorptive properties were shown. The samples synthesized are organophilic. The affinity for n-hexane increases with increasing length of the fluorine-containing chain (PFES) and the content of fluorinated groups in the surface layer. The hybrid organic–inorganic materials that were obtained can be used for adsorption of hydrocarbons, including oil, from water.     

预聚物复合助稳定剂条件下含氟丙烯酸酯共聚物的细乳液聚合

以甲基丙烯酸三氟乙酯(TFMA)、苯乙烯(St)和丙烯酸丁酯(BA)为共聚单体,在十二烷基硫酸钠(SDS)/磺酸盐型阴离子氟表面活性剂(S100)/辛基苯基聚氧乙烯醚(OP-10)组成的乳化体系中,采用预聚物和十六醇(HDL)共同组成的复合助稳定剂,对细乳液聚合制备St/BA/TFMA三元共聚物的过程进行了研究.通过F...     

改性三氧化二铬催化1,1,3,3-四氯丙烯氟化高选择性合成反式-1-氯-3,3,3-三氟丙烯研究

反式-1-氯-3, 3, 3-三氟丙烯 (HCFO-1233zd (E))是近年来正在研发的第四代发泡剂,其大气臭氧消耗潜能值为0.00024,温室效应潜能值为7.0,毒性低,常态下不燃,使用安全;它也是合成含氟精细化工品的中间体,以及合成氟树脂和氟弹性体的单体。本论文制备了Al,Zn,Co改性的Cr2O3催化剂,将其成功应用于1, 1, 3, 3-四氯丙烯（HCC-1230za）与氟化氢反应中,高选择性地合成HCFO-1233zd (E),复合催化剂Zn / Cr2O3显示高稳定性,其中HCC-1230za转化率高达99.4％,HCFO-1233zd（E）的选择性高达98.2％。反应条件诸如反应物HF / HCC-1230za 的摩尔比和反应温度等对产物分布有显着影响。在相对较低的温度（200?C）和较大的HF / HCC-1230za 摩尔比（10：1）下,对HCFO-1233zd（E）的选择性有利。通过XRD,XPS,BET和V70吡啶吸附红外光谱技术对复合催化剂Zn / Cr2O3进行了表征。 XRD结果表明,催化剂中大多数无定形Cr2O3和高度分散微晶相Cr2O3共同导致催化剂的高活性和高稳定性。HCC-1230za的转化率与预氟化处理催化剂Zn / Cr2O3的比表面积有关,催化剂的比表面积越高,催化活性越高。XPS光谱表明,在预氟化过程中,表面铬氧化物可能与F原子强烈相互作用,从而导致Cr原子的化学环境发生广泛变化。V70吡啶吸附红外光谱和氨-程序升温脱附技术结果证明尚未失活的催化剂Lewis 酸和Br?nsted酸中心的数目和强度与新制备的催化剂相比明显提高。